Welcome to your Logmor Cellular Smart Outlet. Most people are up and running in 5–10 minutes. Follow the steps below, then manage everything from the Device Console.
Set up in 5 steps
- 1
Plug in the outlet
Connect the included cord and plug it directly into a grounded 120V wall receptacle. Wait until the LED is breathing cyan; that means it's connected to the cellular network.
- 2
Create your account
Go to device.logmor.com and sign up.
- 3
Activate the outlet
Open Activate Device and enter the device ID from the QR sticker on the back of the outlet. Add a payment card; nothing is charged during the 14-day free trial.
- 4
Connect your equipment and test
Plug in your equipment and try On, Off and Power Cycle (off for 30 seconds, then back on) from the device page.
- 5
Optional set-up
Choose whether the outlet comes back ON or OFF after a power outage, add up to 10 schedule rules, and generate an API token under Cloud API to connect Home Assistant, Zapier, n8n or an AI agent.
Important safety information
- Equipment can switch on remotely or on a schedule, with no one present. Only connect equipment that is safe to run unattended, and keep heaters away from anything that can burn.
- Unplug connected equipment from the outlet before servicing it. Turning it off in the app is not a safe disconnect.
- Do not exceed 12A / 1440W. Check the wattage on the label of anything you plug in, especially heaters.
- Plug directly into a grounded 120V wall receptacle, not an extension cord or power strip. Don't use it if anything is damaged.
- Keep it dry: indoors, or in a weatherproof enclosure in a dry location on a GFCI-protected circuit.
- Not for medical, life-support or life-safety equipment.
- Don't rely on it as your only protection against freezing, flooding or other damage. Cellular service and power can be interrupted.
At a glance
Service
$15 / month per outlet
after a 14-day free trial
- Cellular data included
- Device Console & API
- No contract
- Deactivate and reactivate any outlet online
Specifications
- Rating
- 120VAC · 12A · 1440W max
- Network
- LTE Cat M1
- Carriers
- US: AT&T, T-Mobile
Canada: Rogers, Telus, Bell
Mexico: AT&T - Operating temp
- −20°C to 60°C
(−4°F to 140°F) - Warranty
- 1-year limited
